Mon – thur: 10am – 8pm , Fri – Sat: 10am – 9pm , Sun: 11am – 6pm
to Remove Water from Inside a Phone Screen

How to Remove Water from Inside a Phone Screen

To effectively remove water from inside a phone screen, start by quickly taking the phone out of the water, powering it off, and, if possible, removing the battery. Pat the device dry with a soft cloth, then use a vacuum to draw out water from openings like the charging port. Bury the phone in silica gel packs for 24 hours to absorb residual moisture. Follow up by placing the phone near a desk lamp or on a windowsill to allow gentle heat and airflow to aid in the drying process. Once dry, use a microfiber cloth and isopropyl alcohol to clean any remaining watermarks on the screen. If issues persist, seek professional help. Let’s get into the details now, shall we?

Steps to Remove Water from Inside a Phone Screen

Take the Phone Out of the Water

The first and most crucial step while removing water from inside a phone screen is to act fast. Take your phone out of the water immediately. The longer it stays submerged, the higher the possibility of irreparable phone screen damage. Be cautious, and make sure not to press any buttons that could force water further into the device.

Power Off the Phone

Once you have the phone in your hands, turn it off immediately. This minimizes the risk of a short circuit and electrical damage. If the screen is responsive, power it down through the normal shut-down procedure. If not, perform a hard reset according to your device’s specifications.

Remove the Battery (If Possible)

If your phone has a removable battery, take it out. This step is particularly crucial in the process of removing water from inside your phone screen as it prevents any electric current from flowing through the device. Removing the battery can also help in the drying process by allowing air to circulate more freely.

Dry Your Phone to Remove Moisture

Gently pat your phone dry with a soft, absorbent cloth. Avoid using a hairdryer or heat gun, as excessive heat may cause more harm than good. Instead, focus on removing as much visible moisture as possible before moving on to the next steps.

Use a Vacuum

A vacuum can be a handy tool for drawing out water from your phone. Place the nozzle near the openings of your device (such as the charging port and headphone jack) and let the vacuum do its work. Ensure it’s on a low setting to avoid damaging delicate components.

Bury Your Phone in Silica Gel Packs

Silica gel packs are excellent at absorbing moisture and will work best while trying to get rid of water if it seeped into a phone screen. Place your phone in a sealable bag or container filled with these packs. The gel will help to pull out the remaining water from the nooks and crannies of your device. Leave it submerged for at least 24 hours for optimal results.

Use a Desk Lamp or Windowsill to Dry Your Phone

After the silica gel treatment, give your phone some exposure to indirect heat and airflow. Placing it near a desk lamp or on a windowsill can aid in the final stages of drying. Make sure the environment is not too hot, as excessive heat can damage internal components.

Clean Leftover Watermarks on Your Phone

Even after the phone is dry, watermarks may linger on the screen. To eliminate them, use a microfiber cloth and a small amount of isopropyl alcohol. Gently wipe the screen, ensuring not to press too hard. This step will not only remove watermarks but also sanitize your device.

If the Issue Persists, Seek Professional Help

Despite your best efforts, if your phone continues to show issues or fails to turn on, it’s time to seek professional assistance. Contact your device manufacturer or a reputable phone repair service like Appcessories LLC. Our professional technicians have the expertise and tools to diagnose and address more complex internal damage. They will be more than happy to help you remove water from your phone speakers and phone screen if it gets inside.

Conclusion

Getting rid of water after it gets inside your phone screen is a time-sensitive process that requires a combination of swift action and careful procedures. By following the steps outlined in this guide, you increase the chances of salvaging your device and preventing long-term damage. Remember, patience is key, and each step plays a crucial role in the overall effectiveness of the process.

FAQs

Q1: Can I use rice to remove water from inside my screen?

A1: While rice is a popular DIY solution, it’s not the most effective. Silica gel packs are a better option as they absorb moisture more efficiently, reducing the risk of long-term damage.

Q2: Is it safe to use a hairdryer to dry my phone?

A2: It’s not recommended to use a hairdryer as the heat can cause more harm than good. Stick to gentle methods like air-drying, silica gel, and indirect heat to prevent further damage.

Q3: How long should I wait before turning on my phone after water exposure?

A3: Patience is crucial. Wait at least 24 to 48 hours before attempting to power on your phone. Rushing the process may lead to residual moisture, causing damage to internal components.

Leave a Comment

Your email address will not be published. Required fields are marked *